Package test_suite :: Package unit_tests :: Module value_testing_base :: Class Value_base_class
[hide private]
[frames] | no frames]

Class Value_base_class

source code


Base class for the tests of both the 'prompt.value' and 'generic_fns.value' modules.

This base class also contains many shared unit tests.

Nested Classes [hide private]

Inherited from unittest.case.TestCase: failureException

Instance Methods [hide private]
 
setUp(self)
Set up for all the value unit tests.
source code
 
set_up_spins(self, pipe_name=None)
Function for setting up a few spins for the given pipe.
source code
 
test_set_ct_all_spins_csa(self)
Set the consistency testing CSA parameter for all spins.
source code
 
test_set_ct_all_spins_diff_j0_f_eta_f_r2(self)
Set different consistency tests parameters J(0), F_eta, F_R2 for all spins.
source code
 
test_set_ct_all_spins_f_eta(self)
Set the consistency testing parameter F_eta for all spins.
source code
 
test_set_ct_all_spins_f_r2(self)
Set the consistency testing parameter F_R2 for all spins.
source code
 
test_set_ct_all_spins_heteronucleus(self)
Set the consistency testing heteronucleus type for all spins.
source code
 
test_set_ct_all_spins_j0(self)
Set the consistency testing parameter J(0) for all spins.
source code
 
test_set_ct_all_spins_orientation(self)
Set the consistency testing theta angle for all spins.
source code
 
test_set_ct_all_spins_r(self)
Set the consistency testing bond length parameter for all spins.
source code
 
test_set_ct_all_spins_same_j0_f_eta_f_r2(self)
Set consistency tests parameters J(0), F_eta, F_R2 for all spins to the same value.
source code
 
test_set_ct_all_spins_tc(self)
Set the consistency testing approximate correlation time for all spins.
source code
 
test_set_ct_defaults_csa(self)
Set the consistency testing CSA parameter to the default value.
source code
 
test_set_ct_defaults_f_eta(self)
Set the consistency tests parameter F_eta to the default value (there is none!).
source code
 
test_set_ct_defaults_f_r2(self)
Set the consistency tests parameter F_R2 to the default value (there is none!).
source code
 
test_set_ct_defaults_heteronucleus(self)
Set the consistency testing heteronucleus type to the default value.
source code
 
test_set_ct_defaults_j0(self)
Set the consistency testing parameter J(0) to the default value (there is none!).
source code
 
test_set_ct_defaults_j0_f_eta_f_r2(self)
Set different consistency testing parameters J(0), F_eta, F_R2 to the default values (there are none!).
source code
 
test_set_ct_defaults_orientation(self)
Set the consistency testing theta angle parameter to the default value.
source code
 
test_set_ct_defaults_r(self)
Set the consistency testing bond length parameter to the default value.
source code
 
test_set_ct_defaults_tc(self)
Set the consistency testing approximate correlation time parameter to the default value.
source code
 
test_set_ct_single_spin_csa(self)
Set the consistency tests CSA parameter for a single spin.
source code
 
test_set_ct_single_spin_diff_j0_f_eta_f_r2(self)
Set different consistency tests parameters J(0), F_eta, F_R2 for a single spin.
source code
 
test_set_ct_single_spin_f_eta(self)
Set the consistency tests parameter F_eta for a single spin.
source code
 
test_set_ct_single_spin_f_r2(self)
Set the consistency tests parameter F_R2 for a single spin.
source code
 
test_set_ct_single_spin_heteronucleus(self)
Set the consistency testing heteronucleus type for a single spin.
source code
 
test_set_ct_single_spin_j0(self)
Set the consistency tests parameter J(0) for a single spin.
source code
 
test_set_ct_single_spin_orientation(self)
Set the consistency tests theta angle parameter for a single spin.
source code
 
test_set_ct_single_spin_r(self)
Set the consistency tests bond length parameter for a single spin.
source code
 
test_set_ct_single_spin_same_j0_f_eta_f_r2(self)
Set consistency tests parameters J(0), F_eta, F_R2 for a single spin to the same value.
source code
 
test_set_ct_single_spin_tc(self)
Set the consistency tests approximate correlation time parameter for a single spin.
source code
 
test_set_jw_all_spins_csa(self)
Set the RSDM CSA parameter for all spins.
source code
 
test_set_jw_all_spins_diff_j0_jwx_jwh(self)
Set different RSDM parameters J(0), J(wX), J(wH) for all spins.
source code
 
test_set_jw_all_spins_heteronucleus(self)
Set the RSDM heteronucleus type for all spins.
source code
 
test_set_jw_all_spins_j0(self)
Set the RSDM parameter J(0) for all spins.
source code
 
test_set_jw_all_spins_jwh(self)
Set the RSDM parameter J(wH) for all spins.
source code
 
test_set_jw_all_spins_jwx(self)
Set the RSDM parameter J(wX) for all spins.
source code
 
test_set_jw_all_spins_r(self)
Set the RSDM bond length parameter for all spins.
source code
 
test_set_jw_all_spins_same_j0_jwx_jwh(self)
Set RSDM parameters J(0), J(wX), J(wH) for all spins to the same value.
source code
 
test_set_jw_defaults_csa(self)
Set the RSDM CSA parameter to the default value.
source code
 
test_set_jw_defaults_heteronucleus(self)
Set the RSDM heteronucleus type to the default value.
source code
 
test_set_jw_defaults_j0(self)
Set the RSDM parameter J(0) to the default value (there is none!).
source code
 
test_set_jw_defaults_j0_jwx_jwh(self)
Set different RSDM parameters J(0), J(wX), J(wH) to the default values (there are none!).
source code
 
test_set_jw_defaults_jwh(self)
Set the RSDM parameter J(wH) to the default value (there is none!).
source code
 
test_set_jw_defaults_jwx(self)
Set the RSDM parameter J(wX) to the default value (there is none!).
source code
 
test_set_jw_defaults_r(self)
Set the RSDM bond length parameter to the default value.
source code
 
test_set_jw_single_spin_csa(self)
Set the RSDM CSA parameter for a single spin.
source code
 
test_set_jw_single_spin_diff_j0_jwx_jwh(self)
Set different RSDM parameters J(0), J(wX), J(wH) for a single spin.
source code
 
test_set_jw_single_spin_heteronucleus(self)
Set the RSDM heteronucleus type for a single spin.
source code
 
test_set_jw_single_spin_j0(self)
Set the RSDM parameter J(0) for a single spin.
source code
 
test_set_jw_single_spin_jwh(self)
Set the RSDM parameter J(wH) for a single spin.
source code
 
test_set_jw_single_spin_jwx(self)
Set the RSDM parameter J(wX) for a single spin.
source code
 
test_set_jw_single_spin_r(self)
Set the RSDM bond length parameter for a single spin.
source code
 
test_set_jw_single_spin_same_j0_jwx_jwh(self)
Set RSDM parameters J(0), J(wX), J(wH) for a single spin to the same value.
source code
 
test_set_mf_all_spins_csa(self)
Set the model-free CSA parameter for all spins.
source code
 
test_set_mf_all_spins_diff_s2f_s2s(self)
Set the model-free S2f and S2s parameters for all spins to different values.
source code
 
test_set_mf_all_spins_heteronucleus(self)
Set the model-free heteronucleus type for all spins.
source code
 
test_set_mf_all_spins_local_tm(self)
Set the model-free local tm parameter for all spins.
source code
 
test_set_mf_all_spins_r(self)
Set the model-free bond length parameter for all spins.
source code
 
test_set_mf_all_spins_rex(self)
Set the model-free Rex parameter for all spins.
source code
 
test_set_mf_all_spins_s2(self)
Set the model-free S2 parameter for all spins.
source code
 
test_set_mf_all_spins_s2f(self)
Set the model-free S2f parameter for all spins.
source code
 
test_set_mf_all_spins_s2s(self)
Set the model-free S2s parameter for all spins.
source code
 
test_set_mf_all_spins_same_s2f_s2s(self)
Set the model-free S2f and S2s parameters for all spins to the same value.
source code
 
test_set_mf_all_spins_te(self)
Set the model-free te parameter for all spins.
source code
 
test_set_mf_all_spins_tf(self)
Set the model-free tf parameter for all spins.
source code
 
test_set_mf_all_spins_ts(self)
Set the model-free ts parameter for all spins.
source code
 
test_set_mf_defaults_csa(self)
Set the model-free CSA parameter to the default value.
source code
 
test_set_mf_defaults_heteronucleus(self)
Set the model-free heteronucleus type to the default value.
source code
 
test_set_mf_defaults_local_tm(self)
Set the model-free local tm parameter to the default value.
source code
 
test_set_mf_defaults_r(self)
Set the model-free bond length parameter to the default value.
source code
 
test_set_mf_defaults_rex(self)
Set the model-free Rex parameter to the default value.
source code
 
test_set_mf_defaults_s2(self)
Set the model-free S2 parameter to the default value.
source code
 
test_set_mf_defaults_s2f(self)
Set the model-free S2f parameter to the default value.
source code
 
test_set_mf_defaults_s2f_s2s(self)
Set the model-free S2f and S2s parameters to the default values.
source code
 
test_set_mf_defaults_s2s(self)
Set the model-free S2s parameter to the default value.
source code
 
test_set_mf_defaults_te(self)
Set the model-free te parameter to the default value.
source code
 
test_set_mf_defaults_tf(self)
Set the model-free tf parameter to the default value.
source code
 
test_set_mf_defaults_ts(self)
Set the model-free ts parameter to the default value.
source code
 
test_set_mf_diff_ellipsoid_default_Da(self)
Set the ellipsoidal diffusion tensor Da parameter to the default value.
source code
 
test_set_mf_diff_ellipsoid_default_Diso(self)
Set the ellipsoidal diffusion tensor Diso parameter to the default value.
source code
 
test_set_mf_diff_ellipsoid_default_Diso_Da_Dr(self)
Set the ellipsoidal diffusion tensor parameters {Diso, Da, Dr} to the default values.
source code
 
test_set_mf_diff_ellipsoid_default_Dpar(self)
Try to set the ellipsoidal diffusion tensor Dpar parameter to the default value (this should not be possible).
source code
 
test_set_mf_diff_ellipsoid_default_Dper(self)
Try to set the ellipsoidal diffusion tensor Dper parameter to the default value (this should not be possible).
source code
 
test_set_mf_diff_ellipsoid_default_Dr(self)
Set the ellipsoidal diffusion tensor Dr parameter to the default value.
source code
 
test_set_mf_diff_ellipsoid_default_Dratio(self)
Set the ellipsoidal diffusion tensor Dratio parameter to the default value.
source code
 
test_set_mf_diff_ellipsoid_default_Dx(self)
Set the ellipsoidal diffusion tensor Dx parameter to the default value.
source code
 
test_set_mf_diff_ellipsoid_default_Dx_Dy_Dz(self)
Set the ellipsoidal diffusion tensor parameters {Dx, Dy, Dz} to the default values.
source code
 
test_set_mf_diff_ellipsoid_default_Dy(self)
Set the ellipsoidal diffusion tensor Dy parameter to the default value.
source code
 
test_set_mf_diff_ellipsoid_default_Dz(self)
Set the ellipsoidal diffusion tensor Dz parameter to the default value.
source code
 
test_set_mf_diff_ellipsoid_default_alpha(self)
Try to set the ellipsoidal diffusion tensor alpha parameter to the default value.
source code
 
test_set_mf_diff_ellipsoid_default_beta(self)
Try to set the ellipsoidal diffusion tensor beta parameter to the default value.
source code
 
test_set_mf_diff_ellipsoid_default_diff_tm_Da_Dr(self)
Set the ellipsoidal diffusion tensor parameters {tm, Da, Dr} to the default values.
source code
 
test_set_mf_diff_ellipsoid_default_gamma(self)
Try to set the ellipsoidal diffusion tensor gamma parameter to the default value.
source code
 
test_set_mf_diff_ellipsoid_default_phi(self)
Set the ellipsoidal diffusion tensor phi parameter to the default value.
source code
 
test_set_mf_diff_ellipsoid_default_theta(self)
Set the ellipsoidal diffusion tensor theta parameter to the default value.
source code
 
test_set_mf_diff_ellipsoid_default_tm(self)
Set the ellipsoidal diffusion tensor tm parameter to the default value.
source code
 
test_set_mf_diff_ellipsoid_default_tm_Diso_Dr(self)
Try to set the ellipsoidal diffusion tensor parameters {tm, Diso, Dr} to the default values (this should not be possible).
source code
 
test_set_mf_diff_ellipsoid_set_Da(self)
Set the ellipsoidal diffusion tensor Da parameter.
source code
 
test_set_mf_diff_ellipsoid_set_Diso(self)
Set the ellipsoidal diffusion tensor Diso parameter.
source code
 
test_set_mf_diff_ellipsoid_set_Dpar(self)
Try to set the ellipsoidal diffusion tensor Dpar parameter (this should not be possible).
source code
 
test_set_mf_diff_ellipsoid_set_Dper(self)
Try to set the ellipsoidal diffusion tensor Dper parameter (this should not be possible).
source code
 
test_set_mf_diff_ellipsoid_set_Dr(self)
Set the ellipsoidal diffusion tensor Dr parameter.
source code
 
test_set_mf_diff_ellipsoid_set_Dratio(self)
Set the ellipsoidal diffusion tensor Dratio parameter.
source code
 
test_set_mf_diff_ellipsoid_set_Dx(self)
Set the ellipsoidal diffusion tensor Dx parameter.
source code
 
test_set_mf_diff_ellipsoid_set_Dy(self)
Set the ellipsoidal diffusion tensor Dy parameter.
source code
 
test_set_mf_diff_ellipsoid_set_Dz(self)
Set the ellipsoidal diffusion tensor Dz parameter.
source code
 
test_set_mf_diff_ellipsoid_set_alpha(self)
Try to set the ellipsoidal diffusion tensor alpha parameter.
source code
 
test_set_mf_diff_ellipsoid_set_beta(self)
Try to set the ellipsoidal diffusion tensor beta parameter.
source code
 
test_set_mf_diff_ellipsoid_set_diff_Diso_Da_Dr(self)
Set the ellipsoidal diffusion tensor parameters {Diso, Da, Dr}.
source code
 
test_set_mf_diff_ellipsoid_set_diff_Dx_Dy_Dz(self)
Set the ellipsoidal diffusion tensor parameters {Dx, Dy, Dz}.
source code
 
test_set_mf_diff_ellipsoid_set_diff_tm_Da_Dr(self)
Set the ellipsoidal diffusion tensor parameters {tm, Da, Dr}.
source code
 
test_set_mf_diff_ellipsoid_set_diff_tm_Diso_Dr(self)
Try to set the ellipsoidal diffusion tensor parameters {tm, Diso, Dr} (this should not be possible).
source code
 
test_set_mf_diff_ellipsoid_set_gamma(self)
Try to set the ellipsoidal diffusion tensor gamma parameter.
source code
 
test_set_mf_diff_ellipsoid_set_phi(self)
Set the ellipsoidal diffusion tensor phi parameter.
source code
 
test_set_mf_diff_ellipsoid_set_same_Dx_Dy_Dz(self)
Set the ellipsoidal diffusion tensor parameters {Dx, Dy, Dz} all to the same value.
source code
 
test_set_mf_diff_ellipsoid_set_theta(self)
Set the ellipsoidal diffusion tensor theta parameter.
source code
 
test_set_mf_diff_ellipsoid_set_tm(self)
Set the ellipsoidal diffusion tensor tm parameter.
source code
 
test_set_mf_diff_sphere_default_Da(self)
Try to set the spherical diffusion tensor Da parameter to the default value.
source code
 
test_set_mf_diff_sphere_default_Diso(self)
Set the spherical diffusion tensor Diso parameter to the default value.
source code
 
test_set_mf_diff_sphere_default_Dpar(self)
Try to set the spherical diffusion tensor Dpar parameter to the default value.
source code
 
test_set_mf_diff_sphere_default_Dper(self)
Try to set the spherical diffusion tensor Dper parameter to the default value.
source code
 
test_set_mf_diff_sphere_default_Dr(self)
Try to set the spherical diffusion tensor Dr parameter to the default value.
source code
 
test_set_mf_diff_sphere_default_Dratio(self)
Try to set the spherical diffusion tensor Dratio parameter to the default value.
source code
 
test_set_mf_diff_sphere_default_Dx(self)
Try to set the spherical diffusion tensor Dx parameter to the default value.
source code
 
test_set_mf_diff_sphere_default_Dy(self)
Try to set the spherical diffusion tensor Dy parameter to the default value.
source code
 
test_set_mf_diff_sphere_default_Dz(self)
Try to set the spherical diffusion tensor Dz parameter to the default value.
source code
 
test_set_mf_diff_sphere_default_alpha(self)
Try to set the spherical diffusion tensor alpha parameter to the default value.
source code
 
test_set_mf_diff_sphere_default_beta(self)
Try to set the spherical diffusion tensor beta parameter to the default value.
source code
 
test_set_mf_diff_sphere_default_gamma(self)
Try to set the spherical diffusion tensor gamma parameter to the default value.
source code
 
test_set_mf_diff_sphere_default_phi(self)
Try to set the spherical diffusion tensor phi parameter to the default value.
source code
 
test_set_mf_diff_sphere_default_theta(self)
Try to set the spherical diffusion tensor theta parameter to the default value.
source code
 
test_set_mf_diff_sphere_default_tm(self)
Set the spherical diffusion tensor tm parameter to the default value.
source code
 
test_set_mf_diff_sphere_set_Da(self)
Try to set the spherical diffusion tensor Da parameter.
source code
 
test_set_mf_diff_sphere_set_Diso(self)
Set the spherical diffusion tensor Diso parameter.
source code
 
test_set_mf_diff_sphere_set_Dpar(self)
Try to set the spherical diffusion tensor Dpar parameter.
source code
 
test_set_mf_diff_sphere_set_Dper(self)
Try to set the spherical diffusion tensor Dper parameter.
source code
 
test_set_mf_diff_sphere_set_Dr(self)
Try to set the spherical diffusion tensor Dr parameter.
source code
 
test_set_mf_diff_sphere_set_Dratio(self)
Try to set the spherical diffusion tensor Dratio parameter.
source code
 
test_set_mf_diff_sphere_set_Dx(self)
Try to set the spherical diffusion tensor Dx parameter.
source code
 
test_set_mf_diff_sphere_set_Dy(self)
Try to set the spherical diffusion tensor Dy parameter.
source code
 
test_set_mf_diff_sphere_set_Dz(self)
Try to set the spherical diffusion tensor Dz parameter.
source code
 
test_set_mf_diff_sphere_set_alpha(self)
Try to set the spherical diffusion tensor alpha parameter.
source code
 
test_set_mf_diff_sphere_set_beta(self)
Try to set the spherical diffusion tensor beta parameter.
source code
 
test_set_mf_diff_sphere_set_gamma(self)
Try to set the spherical diffusion tensor gamma parameter.
source code
 
test_set_mf_diff_sphere_set_phi(self)
Try to set the spherical diffusion tensor phi parameter.
source code
 
test_set_mf_diff_sphere_set_theta(self)
Try to set the spherical diffusion tensor theta parameter.
source code
 
test_set_mf_diff_sphere_set_tm(self)
Set the spherical diffusion tensor tm parameter.
source code
 
test_set_mf_diff_spheroid_default_Da(self)
Set the spheroidal diffusion tensor Da parameter to the default value.
source code
 
test_set_mf_diff_spheroid_default_Diso(self)
Set the spheroidal diffusion tensor Diso parameter to the default value.
source code
 
test_set_mf_diff_spheroid_default_Diso_Da(self)
Set the spheroidal diffusion tensor parameters {Diso, Da} to the default values.
source code
 
test_set_mf_diff_spheroid_default_Diso_Dratio(self)
Set the spheroidal diffusion tensor parameters {Diso, Dratio} to the default values.
source code
 
test_set_mf_diff_spheroid_default_Dpar(self)
Try to set the spheroidal diffusion tensor Dpar parameter to the default value (this should not be possible).
source code
 
test_set_mf_diff_spheroid_default_Dpar_Dper(self)
Set the spheroidal diffusion tensor parameters {Dpar, Dper} to the default values.
source code
 
test_set_mf_diff_spheroid_default_Dpar_Dratio(self)
Set the spheroidal diffusion tensor parameters {Dpar, Dratio} to the default values (this should not be possible).
source code
 
test_set_mf_diff_spheroid_default_Dper(self)
Try to set the spheroidal diffusion tensor Dper parameter to the default value (this should not be possible).
source code
 
test_set_mf_diff_spheroid_default_Dper_Dpar(self)
Set the spheroidal diffusion tensor parameters {Dper, Dpar} to the default values.
source code
 
test_set_mf_diff_spheroid_default_Dr(self)
Set the spheroidal diffusion tensor Dr parameter to the default value.
source code
 
test_set_mf_diff_spheroid_default_Dratio(self)
Set the spheroidal diffusion tensor Dratio parameter to the default value.
source code
 
test_set_mf_diff_spheroid_default_Dx(self)
Set the spheroidal diffusion tensor Dx parameter to the default value.
source code
 
test_set_mf_diff_spheroid_default_Dy(self)
Set the spheroidal diffusion tensor Dy parameter to the default value.
source code
 
test_set_mf_diff_spheroid_default_Dz(self)
Set the spheroidal diffusion tensor Dz parameter to the default value.
source code
 
test_set_mf_diff_spheroid_default_alpha(self)
Try to set the spheroidal diffusion tensor alpha parameter to the default value.
source code
 
test_set_mf_diff_spheroid_default_beta(self)
Try to set the spheroidal diffusion tensor beta parameter to the default value.
source code
 
test_set_mf_diff_spheroid_default_gamma(self)
Try to set the spheroidal diffusion tensor gamma parameter to the default value.
source code
 
test_set_mf_diff_spheroid_default_phi(self)
Set the spheroidal diffusion tensor phi parameter to the default value.
source code
 
test_set_mf_diff_spheroid_default_theta(self)
Set the spheroidal diffusion tensor theta parameter to the default value.
source code
 
test_set_mf_diff_spheroid_default_tm(self)
Set the spheroidal diffusion tensor tm parameter to the default value.
source code
 
test_set_mf_diff_spheroid_default_tm_Da(self)
Set the spheroidal diffusion tensor parameters {tm, Da} to the default values.
source code
 
test_set_mf_diff_spheroid_default_tm_Dratio(self)
Set the spheroidal diffusion tensor parameters {tm, Dratio} to the default values.
source code
 
test_set_mf_diff_spheroid_set_Da(self)
Set the spheroidal diffusion tensor Da parameter.
source code
 
test_set_mf_diff_spheroid_set_Diso(self)
Set the spheroidal diffusion tensor Diso parameter.
source code
 
test_set_mf_diff_spheroid_set_Dpar(self)
Try to set the spheroidal diffusion tensor Dpar parameter (this should not be possible).
source code
 
test_set_mf_diff_spheroid_set_Dper(self)
Try to set the spheroidal diffusion tensor Dper parameter (this should not be possible).
source code
 
test_set_mf_diff_spheroid_set_Dr(self)
Set the spheroidal diffusion tensor Dr parameter.
source code
 
test_set_mf_diff_spheroid_set_Dratio(self)
Set the spheroidal diffusion tensor Dratio parameter.
source code
 
test_set_mf_diff_spheroid_set_Dx(self)
Set the spheroidal diffusion tensor Dx parameter.
source code
 
test_set_mf_diff_spheroid_set_Dy(self)
Set the spheroidal diffusion tensor Dy parameter.
source code
 
test_set_mf_diff_spheroid_set_Dz(self)
Set the spheroidal diffusion tensor Dz parameter.
source code
 
test_set_mf_diff_spheroid_set_alpha(self)
Try to set the spheroidal diffusion tensor alpha parameter.
source code
 
test_set_mf_diff_spheroid_set_beta(self)
Try to set the spheroidal diffusion tensor beta parameter.
source code
 
test_set_mf_diff_spheroid_set_diff_Diso_Da(self)
Set the spheroidal diffusion tensor parameters {Diso, Da}.
source code
 
test_set_mf_diff_spheroid_set_diff_Diso_Dratio(self)
Set the spheroidal diffusion tensor parameters {Diso, Dratio}.
source code
 
test_set_mf_diff_spheroid_set_diff_Dpar_Dper(self)
Set the spheroidal diffusion tensor parameters {Dpar, Dper}.
source code
 
test_set_mf_diff_spheroid_set_diff_Dpar_Dratio(self)
Set the spheroidal diffusion tensor parameters {Dpar, Dratio} (this should not be possible).
source code
 
test_set_mf_diff_spheroid_set_diff_Dper_Dpar(self)
Set the spheroidal diffusion tensor parameters {Dper, Dpar}.
source code
 
test_set_mf_diff_spheroid_set_diff_tm_Da(self)
Set the spheroidal diffusion tensor parameters {tm, Da}.
source code
 
test_set_mf_diff_spheroid_set_diff_tm_Dratio(self)
Set the spheroidal diffusion tensor parameters {tm, Dratio}.
source code
 
test_set_mf_diff_spheroid_set_gamma(self)
Try to set the spheroidal diffusion tensor gamma parameter.
source code
 
test_set_mf_diff_spheroid_set_phi(self)
Set the spheroidal diffusion tensor phi parameter.
source code
 
test_set_mf_diff_spheroid_set_theta(self)
Set the spheroidal diffusion tensor theta parameter.
source code
 
test_set_mf_diff_spheroid_set_tm(self)
Set the spheroidal diffusion tensor tm parameter.
source code
 
test_set_mf_single_spin_csa(self)
Set the model-free CSA parameter for a single spin.
source code
 
test_set_mf_single_spin_diff_s2f_s2s(self)
Set the model-free S2f and S2s parameters for a single spin to different values.
source code
 
test_set_mf_single_spin_heteronucleus(self)
Set the model-free heteronucleus type for a single spin.
source code
 
test_set_mf_single_spin_local_tm(self)
Set the model-free local tm parameter for a single spin.
source code
 
test_set_mf_single_spin_r(self)
Set the model-free bond length parameter for a single spin.
source code
 
test_set_mf_single_spin_rex(self)
Set the model-free Rex parameter for a single spin.
source code
 
test_set_mf_single_spin_s2(self)
Set the model-free S2 parameter for a single spin.
source code
 
test_set_mf_single_spin_s2f(self)
Set the model-free S2f parameter for a single spin.
source code
 
test_set_mf_single_spin_s2s(self)
Set the model-free S2s parameter for a single spin.
source code
 
test_set_mf_single_spin_same_s2f_s2s(self)
Set the model-free S2f and S2s parameters for a single spin to the same value.
source code
 
test_set_mf_single_spin_te(self)
Set the model-free te parameter for a single spin.
source code
 
test_set_mf_single_spin_tf(self)
Set the model-free tf parameter for a single spin.
source code
 
test_set_mf_single_spin_ts(self)
Set the model-free ts parameter for a single spin.
source code
 
test_set_n_state_model_rx(self)
Set the N-state model curve fitting alpha2 parameter.
source code
 
test_set_relax_fit_all_spins_diff_i0_iinf(self)
Set the relaxation curve fitting parameters {I0, Iinf} for all spins to different values.
source code
 
test_set_relax_fit_all_spins_i0(self)
Set the relaxation curve fitting I0 parameter for all spins.
source code
 
test_set_relax_fit_all_spins_iinf(self)
Set the relaxation curve fitting Iinf parameter for all spins.
source code
 
test_set_relax_fit_all_spins_rx(self)
Set the relaxation curve fitting Rx parameter for all spins.
source code
 
test_set_relax_fit_all_spins_same_i0_iinf(self)
Set the relaxation curve fitting parameters {I0, Iinf} for all spins to the same value.
source code
 
test_set_relax_fit_defaults_i0(self)
Set the relaxation curve fitting I0 parameter to the default value.
source code
 
test_set_relax_fit_defaults_i0_iinf(self)
Set the relaxation curve fitting parameters {I0, Iinf} to the default values.
source code
 
test_set_relax_fit_defaults_iinf(self)
Set the relaxation curve fitting Iinf parameter to the default value.
source code
 
test_set_relax_fit_defaults_rx(self)
Set the relaxation curve fitting Rx parameter to the default value.
source code
 
test_set_relax_fit_single_spin_diff_i0_iinf(self)
Set the relaxation curve fitting parameters {I0, Iinf} for all spins to different values.
source code
 
test_set_relax_fit_single_spin_i0(self)
Set the relaxation curve fitting I0 parameter for all spins.
source code
 
test_set_relax_fit_single_spin_iinf(self)
Set the relaxation curve fitting Iinf parameter for all spins.
source code
 
test_set_relax_fit_single_spin_rx(self)
Set the relaxation curve fitting Rx parameter for all spins.
source code
 
test_set_relax_fit_single_spin_same_i0_iinf(self)
Set the relaxation curve fitting parameters {I0, Iinf} for all spins to the same value.
source code

Inherited from base_classes.UnitTestCase: tearDown

Inherited from unittest.case.TestCase: __call__, __eq__, __hash__, __init__, __ne__, __repr__, __str__, addCleanup, addTypeEqualityFunc, assertAlmostEqual, assertAlmostEquals, assertDictContainsSubset, assertDictEqual, assertEqual, assertEquals, assertFalse, assertGreater, assertGreaterEqual, assertIn, assertIs, assertIsInstance, assertIsNone, assertIsNot, assertIsNotNone, assertItemsEqual, assertLess, assertLessEqual, assertListEqual, assertMultiLineEqual, assertNotAlmostEqual, assertNotAlmostEquals, assertNotEqual, assertNotEquals, assertNotIn, assertNotIsInstance, assertNotRegexpMatches, assertRaises, assertRaisesRegexp, assertRegexpMatches, assertSequenceEqual, assertSetEqual, assertTrue, assertTupleEqual, assert_, countTestCases, debug, defaultTestResult, doCleanups, fail, failIf, failIfAlmostEqual, failIfEqual, failUnless, failUnlessAlmostEqual, failUnlessEqual, failUnlessRaises, id, run, shortDescription, skipTest

Inherited from unittest.case.TestCase (private): _addSkip, _baseAssertEqual, _deprecate, _formatMessage, _getAssertEqualityFunc, _truncateMessage

Inherited from object: __delattr__, __format__, __getattribute__, __new__, __reduce__, __reduce_ex__, __setattr__, __sizeof__, __subclasshook__

Class Methods [hide private]

Inherited from unittest.case.TestCase: setUpClass, tearDownClass

Class Variables [hide private]

Inherited from unittest.case.TestCase: longMessage, maxDiff

Inherited from unittest.case.TestCase (private): _classSetupFailed

Properties [hide private]

Inherited from object: __class__

Method Details [hide private]

setUp(self)

source code 

Set up for all the value unit tests.

Overrides: unittest.case.TestCase.setUp

test_set_ct_all_spins_csa(self)

source code 

Set the consistency testing CSA parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_all_spins_diff_j0_f_eta_f_r2(self)

source code 

Set different consistency tests parameters J(0), F_eta, F_R2 for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_all_spins_f_eta(self)

source code 

Set the consistency testing parameter F_eta for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_all_spins_f_r2(self)

source code 

Set the consistency testing parameter F_R2 for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_all_spins_heteronucleus(self)

source code 

Set the consistency testing heteronucleus type for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_all_spins_j0(self)

source code 

Set the consistency testing parameter J(0) for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_all_spins_orientation(self)

source code 

Set the consistency testing theta angle for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_all_spins_r(self)

source code 

Set the consistency testing bond length parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_all_spins_same_j0_f_eta_f_r2(self)

source code 

Set consistency tests parameters J(0), F_eta, F_R2 for all spins to the same value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_all_spins_tc(self)

source code 

Set the consistency testing approximate correlation time for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_defaults_csa(self)

source code 

Set the consistency testing CSA parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_defaults_f_eta(self)

source code 

Set the consistency tests parameter F_eta to the default value (there is none!).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_defaults_f_r2(self)

source code 

Set the consistency tests parameter F_R2 to the default value (there is none!).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_defaults_heteronucleus(self)

source code 

Set the consistency testing heteronucleus type to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_defaults_j0(self)

source code 

Set the consistency testing parameter J(0) to the default value (there is none!).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_defaults_j0_f_eta_f_r2(self)

source code 

Set different consistency testing parameters J(0), F_eta, F_R2 to the default values (there are none!).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_defaults_orientation(self)

source code 

Set the consistency testing theta angle parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_defaults_r(self)

source code 

Set the consistency testing bond length parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_defaults_tc(self)

source code 

Set the consistency testing approximate correlation time parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_single_spin_csa(self)

source code 

Set the consistency tests CSA parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_single_spin_diff_j0_f_eta_f_r2(self)

source code 

Set different consistency tests parameters J(0), F_eta, F_R2 for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_single_spin_f_eta(self)

source code 

Set the consistency tests parameter F_eta for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_single_spin_f_r2(self)

source code 

Set the consistency tests parameter F_R2 for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_single_spin_heteronucleus(self)

source code 

Set the consistency testing heteronucleus type for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_single_spin_j0(self)

source code 

Set the consistency tests parameter J(0) for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_single_spin_orientation(self)

source code 

Set the consistency tests theta angle parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_single_spin_r(self)

source code 

Set the consistency tests bond length parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_single_spin_same_j0_f_eta_f_r2(self)

source code 

Set consistency tests parameters J(0), F_eta, F_R2 for a single spin to the same value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_ct_single_spin_tc(self)

source code 

Set the consistency tests approximate correlation time parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_all_spins_csa(self)

source code 

Set the RSDM CSA parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_all_spins_diff_j0_jwx_jwh(self)

source code 

Set different RSDM parameters J(0), J(wX), J(wH) for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_all_spins_heteronucleus(self)

source code 

Set the RSDM heteronucleus type for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_all_spins_j0(self)

source code 

Set the RSDM parameter J(0) for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_all_spins_jwh(self)

source code 

Set the RSDM parameter J(wH) for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_all_spins_jwx(self)

source code 

Set the RSDM parameter J(wX) for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_all_spins_r(self)

source code 

Set the RSDM bond length parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_all_spins_same_j0_jwx_jwh(self)

source code 

Set RSDM parameters J(0), J(wX), J(wH) for all spins to the same value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_defaults_csa(self)

source code 

Set the RSDM CSA parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_defaults_heteronucleus(self)

source code 

Set the RSDM heteronucleus type to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_defaults_j0(self)

source code 

Set the RSDM parameter J(0) to the default value (there is none!).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_defaults_j0_jwx_jwh(self)

source code 

Set different RSDM parameters J(0), J(wX), J(wH) to the default values (there are none!).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_defaults_jwh(self)

source code 

Set the RSDM parameter J(wH) to the default value (there is none!).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_defaults_jwx(self)

source code 

Set the RSDM parameter J(wX) to the default value (there is none!).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_defaults_r(self)

source code 

Set the RSDM bond length parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_single_spin_csa(self)

source code 

Set the RSDM CSA parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_single_spin_diff_j0_jwx_jwh(self)

source code 

Set different RSDM parameters J(0), J(wX), J(wH) for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_single_spin_heteronucleus(self)

source code 

Set the RSDM heteronucleus type for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_single_spin_j0(self)

source code 

Set the RSDM parameter J(0) for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_single_spin_jwh(self)

source code 

Set the RSDM parameter J(wH) for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_single_spin_jwx(self)

source code 

Set the RSDM parameter J(wX) for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_single_spin_r(self)

source code 

Set the RSDM bond length parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_jw_single_spin_same_j0_jwx_jwh(self)

source code 

Set RSDM parameters J(0), J(wX), J(wH) for a single spin to the same value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_all_spins_csa(self)

source code 

Set the model-free CSA parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_all_spins_diff_s2f_s2s(self)

source code 

Set the model-free S2f and S2s parameters for all spins to different values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_all_spins_heteronucleus(self)

source code 

Set the model-free heteronucleus type for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_all_spins_local_tm(self)

source code 

Set the model-free local tm parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_all_spins_r(self)

source code 

Set the model-free bond length parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_all_spins_rex(self)

source code 

Set the model-free Rex parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_all_spins_s2(self)

source code 

Set the model-free S2 parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_all_spins_s2f(self)

source code 

Set the model-free S2f parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_all_spins_s2s(self)

source code 

Set the model-free S2s parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_all_spins_same_s2f_s2s(self)

source code 

Set the model-free S2f and S2s parameters for all spins to the same value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_all_spins_te(self)

source code 

Set the model-free te parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_all_spins_tf(self)

source code 

Set the model-free tf parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_all_spins_ts(self)

source code 

Set the model-free ts parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_defaults_csa(self)

source code 

Set the model-free CSA parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_defaults_heteronucleus(self)

source code 

Set the model-free heteronucleus type to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_defaults_local_tm(self)

source code 

Set the model-free local tm parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_defaults_r(self)

source code 

Set the model-free bond length parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_defaults_rex(self)

source code 

Set the model-free Rex parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_defaults_s2(self)

source code 

Set the model-free S2 parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_defaults_s2f(self)

source code 

Set the model-free S2f parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_defaults_s2f_s2s(self)

source code 

Set the model-free S2f and S2s parameters to the default values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_defaults_s2s(self)

source code 

Set the model-free S2s parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_defaults_te(self)

source code 

Set the model-free te parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_defaults_tf(self)

source code 

Set the model-free tf parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_defaults_ts(self)

source code 

Set the model-free ts parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_Da(self)

source code 

Set the ellipsoidal diffusion tensor Da parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_Diso(self)

source code 

Set the ellipsoidal diffusion tensor Diso parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_Diso_Da_Dr(self)

source code 

Set the ellipsoidal diffusion tensor parameters {Diso, Da, Dr} to the default values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_Dpar(self)

source code 

Try to set the ellipsoidal diffusion tensor Dpar parameter to the default value (this should not be possible).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_Dper(self)

source code 

Try to set the ellipsoidal diffusion tensor Dper parameter to the default value (this should not be possible).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_Dr(self)

source code 

Set the ellipsoidal diffusion tensor Dr parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_Dratio(self)

source code 

Set the ellipsoidal diffusion tensor Dratio parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_Dx(self)

source code 

Set the ellipsoidal diffusion tensor Dx parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_Dx_Dy_Dz(self)

source code 

Set the ellipsoidal diffusion tensor parameters {Dx, Dy, Dz} to the default values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_Dy(self)

source code 

Set the ellipsoidal diffusion tensor Dy parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_Dz(self)

source code 

Set the ellipsoidal diffusion tensor Dz parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_alpha(self)

source code 

Try to set the ellipsoidal diffusion tensor alpha parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_beta(self)

source code 

Try to set the ellipsoidal diffusion tensor beta parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_diff_tm_Da_Dr(self)

source code 

Set the ellipsoidal diffusion tensor parameters {tm, Da, Dr} to the default values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_gamma(self)

source code 

Try to set the ellipsoidal diffusion tensor gamma parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_phi(self)

source code 

Set the ellipsoidal diffusion tensor phi parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_theta(self)

source code 

Set the ellipsoidal diffusion tensor theta parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_tm(self)

source code 

Set the ellipsoidal diffusion tensor tm parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_default_tm_Diso_Dr(self)

source code 

Try to set the ellipsoidal diffusion tensor parameters {tm, Diso, Dr} to the default values (this should not be possible).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_Da(self)

source code 

Set the ellipsoidal diffusion tensor Da parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_Diso(self)

source code 

Set the ellipsoidal diffusion tensor Diso parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_Dpar(self)

source code 

Try to set the ellipsoidal diffusion tensor Dpar parameter (this should not be possible).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_Dper(self)

source code 

Try to set the ellipsoidal diffusion tensor Dper parameter (this should not be possible).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_Dr(self)

source code 

Set the ellipsoidal diffusion tensor Dr parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_Dratio(self)

source code 

Set the ellipsoidal diffusion tensor Dratio parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_Dx(self)

source code 

Set the ellipsoidal diffusion tensor Dx parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_Dy(self)

source code 

Set the ellipsoidal diffusion tensor Dy parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_Dz(self)

source code 

Set the ellipsoidal diffusion tensor Dz parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_alpha(self)

source code 

Try to set the ellipsoidal diffusion tensor alpha parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_beta(self)

source code 

Try to set the ellipsoidal diffusion tensor beta parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_diff_Diso_Da_Dr(self)

source code 

Set the ellipsoidal diffusion tensor parameters {Diso, Da, Dr}.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_diff_Dx_Dy_Dz(self)

source code 

Set the ellipsoidal diffusion tensor parameters {Dx, Dy, Dz}.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_diff_tm_Da_Dr(self)

source code 

Set the ellipsoidal diffusion tensor parameters {tm, Da, Dr}.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_diff_tm_Diso_Dr(self)

source code 

Try to set the ellipsoidal diffusion tensor parameters {tm, Diso, Dr} (this should not be possible).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_gamma(self)

source code 

Try to set the ellipsoidal diffusion tensor gamma parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_phi(self)

source code 

Set the ellipsoidal diffusion tensor phi parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_same_Dx_Dy_Dz(self)

source code 

Set the ellipsoidal diffusion tensor parameters {Dx, Dy, Dz} all to the same value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_theta(self)

source code 

Set the ellipsoidal diffusion tensor theta parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_ellipsoid_set_tm(self)

source code 

Set the ellipsoidal diffusion tensor tm parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_Da(self)

source code 

Try to set the spherical diffusion tensor Da parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_Diso(self)

source code 

Set the spherical diffusion tensor Diso parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_Dpar(self)

source code 

Try to set the spherical diffusion tensor Dpar parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_Dper(self)

source code 

Try to set the spherical diffusion tensor Dper parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_Dr(self)

source code 

Try to set the spherical diffusion tensor Dr parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_Dratio(self)

source code 

Try to set the spherical diffusion tensor Dratio parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_Dx(self)

source code 

Try to set the spherical diffusion tensor Dx parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_Dy(self)

source code 

Try to set the spherical diffusion tensor Dy parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_Dz(self)

source code 

Try to set the spherical diffusion tensor Dz parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_alpha(self)

source code 

Try to set the spherical diffusion tensor alpha parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_beta(self)

source code 

Try to set the spherical diffusion tensor beta parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_gamma(self)

source code 

Try to set the spherical diffusion tensor gamma parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_phi(self)

source code 

Try to set the spherical diffusion tensor phi parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_theta(self)

source code 

Try to set the spherical diffusion tensor theta parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_default_tm(self)

source code 

Set the spherical diffusion tensor tm parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_Da(self)

source code 

Try to set the spherical diffusion tensor Da parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_Diso(self)

source code 

Set the spherical diffusion tensor Diso parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_Dpar(self)

source code 

Try to set the spherical diffusion tensor Dpar parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_Dper(self)

source code 

Try to set the spherical diffusion tensor Dper parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_Dr(self)

source code 

Try to set the spherical diffusion tensor Dr parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_Dratio(self)

source code 

Try to set the spherical diffusion tensor Dratio parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_Dx(self)

source code 

Try to set the spherical diffusion tensor Dx parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_Dy(self)

source code 

Try to set the spherical diffusion tensor Dy parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_Dz(self)

source code 

Try to set the spherical diffusion tensor Dz parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_alpha(self)

source code 

Try to set the spherical diffusion tensor alpha parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_beta(self)

source code 

Try to set the spherical diffusion tensor beta parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_gamma(self)

source code 

Try to set the spherical diffusion tensor gamma parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_phi(self)

source code 

Try to set the spherical diffusion tensor phi parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_theta(self)

source code 

Try to set the spherical diffusion tensor theta parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_sphere_set_tm(self)

source code 

Set the spherical diffusion tensor tm parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_Da(self)

source code 

Set the spheroidal diffusion tensor Da parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_Diso(self)

source code 

Set the spheroidal diffusion tensor Diso parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_Diso_Da(self)

source code 

Set the spheroidal diffusion tensor parameters {Diso, Da} to the default values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_Diso_Dratio(self)

source code 

Set the spheroidal diffusion tensor parameters {Diso, Dratio} to the default values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_Dpar(self)

source code 

Try to set the spheroidal diffusion tensor Dpar parameter to the default value (this should not be possible).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_Dpar_Dper(self)

source code 

Set the spheroidal diffusion tensor parameters {Dpar, Dper} to the default values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_Dpar_Dratio(self)

source code 

Set the spheroidal diffusion tensor parameters {Dpar, Dratio} to the default values (this should not be possible).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_Dper(self)

source code 

Try to set the spheroidal diffusion tensor Dper parameter to the default value (this should not be possible).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_Dper_Dpar(self)

source code 

Set the spheroidal diffusion tensor parameters {Dper, Dpar} to the default values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_Dr(self)

source code 

Set the spheroidal diffusion tensor Dr parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_Dratio(self)

source code 

Set the spheroidal diffusion tensor Dratio parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_Dx(self)

source code 

Set the spheroidal diffusion tensor Dx parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_Dy(self)

source code 

Set the spheroidal diffusion tensor Dy parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_Dz(self)

source code 

Set the spheroidal diffusion tensor Dz parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_alpha(self)

source code 

Try to set the spheroidal diffusion tensor alpha parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_beta(self)

source code 

Try to set the spheroidal diffusion tensor beta parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_gamma(self)

source code 

Try to set the spheroidal diffusion tensor gamma parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_phi(self)

source code 

Set the spheroidal diffusion tensor phi parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_theta(self)

source code 

Set the spheroidal diffusion tensor theta parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_tm(self)

source code 

Set the spheroidal diffusion tensor tm parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_tm_Da(self)

source code 

Set the spheroidal diffusion tensor parameters {tm, Da} to the default values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_default_tm_Dratio(self)

source code 

Set the spheroidal diffusion tensor parameters {tm, Dratio} to the default values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_Da(self)

source code 

Set the spheroidal diffusion tensor Da parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_Diso(self)

source code 

Set the spheroidal diffusion tensor Diso parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_Dpar(self)

source code 

Try to set the spheroidal diffusion tensor Dpar parameter (this should not be possible).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_Dper(self)

source code 

Try to set the spheroidal diffusion tensor Dper parameter (this should not be possible).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_Dr(self)

source code 

Set the spheroidal diffusion tensor Dr parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_Dratio(self)

source code 

Set the spheroidal diffusion tensor Dratio parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_Dx(self)

source code 

Set the spheroidal diffusion tensor Dx parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_Dy(self)

source code 

Set the spheroidal diffusion tensor Dy parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_Dz(self)

source code 

Set the spheroidal diffusion tensor Dz parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_alpha(self)

source code 

Try to set the spheroidal diffusion tensor alpha parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_beta(self)

source code 

Try to set the spheroidal diffusion tensor beta parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_diff_Diso_Da(self)

source code 

Set the spheroidal diffusion tensor parameters {Diso, Da}.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_diff_Diso_Dratio(self)

source code 

Set the spheroidal diffusion tensor parameters {Diso, Dratio}.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_diff_Dpar_Dper(self)

source code 

Set the spheroidal diffusion tensor parameters {Dpar, Dper}.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_diff_Dpar_Dratio(self)

source code 

Set the spheroidal diffusion tensor parameters {Dpar, Dratio} (this should not be possible).

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_diff_Dper_Dpar(self)

source code 

Set the spheroidal diffusion tensor parameters {Dper, Dpar}.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_diff_tm_Da(self)

source code 

Set the spheroidal diffusion tensor parameters {tm, Da}.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_diff_tm_Dratio(self)

source code 

Set the spheroidal diffusion tensor parameters {tm, Dratio}.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_gamma(self)

source code 

Try to set the spheroidal diffusion tensor gamma parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_phi(self)

source code 

Set the spheroidal diffusion tensor phi parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_theta(self)

source code 

Set the spheroidal diffusion tensor theta parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_diff_spheroid_set_tm(self)

source code 

Set the spheroidal diffusion tensor tm parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_single_spin_csa(self)

source code 

Set the model-free CSA parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_single_spin_diff_s2f_s2s(self)

source code 

Set the model-free S2f and S2s parameters for a single spin to different values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_single_spin_heteronucleus(self)

source code 

Set the model-free heteronucleus type for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_single_spin_local_tm(self)

source code 

Set the model-free local tm parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_single_spin_r(self)

source code 

Set the model-free bond length parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_single_spin_rex(self)

source code 

Set the model-free Rex parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_single_spin_s2(self)

source code 

Set the model-free S2 parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_single_spin_s2f(self)

source code 

Set the model-free S2f parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_single_spin_s2s(self)

source code 

Set the model-free S2s parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_single_spin_same_s2f_s2s(self)

source code 

Set the model-free S2f and S2s parameters for a single spin to the same value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_single_spin_te(self)

source code 

Set the model-free te parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_single_spin_tf(self)

source code 

Set the model-free tf parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_mf_single_spin_ts(self)

source code 

Set the model-free ts parameter for a single spin.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_n_state_model_rx(self)

source code 

Set the N-state model curve fitting alpha2 parameter.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_relax_fit_all_spins_diff_i0_iinf(self)

source code 

Set the relaxation curve fitting parameters {I0, Iinf} for all spins to different values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_relax_fit_all_spins_i0(self)

source code 

Set the relaxation curve fitting I0 parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_relax_fit_all_spins_iinf(self)

source code 

Set the relaxation curve fitting Iinf parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_relax_fit_all_spins_rx(self)

source code 

Set the relaxation curve fitting Rx parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_relax_fit_all_spins_same_i0_iinf(self)

source code 

Set the relaxation curve fitting parameters {I0, Iinf} for all spins to the same value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_relax_fit_defaults_i0(self)

source code 

Set the relaxation curve fitting I0 parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_relax_fit_defaults_i0_iinf(self)

source code 

Set the relaxation curve fitting parameters {I0, Iinf} to the default values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_relax_fit_defaults_iinf(self)

source code 

Set the relaxation curve fitting Iinf parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_relax_fit_defaults_rx(self)

source code 

Set the relaxation curve fitting Rx parameter to the default value.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_relax_fit_single_spin_diff_i0_iinf(self)

source code 

Set the relaxation curve fitting parameters {I0, Iinf} for all spins to different values.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_relax_fit_single_spin_i0(self)

source code 

Set the relaxation curve fitting I0 parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_relax_fit_single_spin_iinf(self)

source code 

Set the relaxation curve fitting Iinf parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_relax_fit_single_spin_rx(self)

source code 

Set the relaxation curve fitting Rx parameter for all spins.

The functions tested are both generic_fns.value.set() and prompt.value.set().

test_set_relax_fit_single_spin_same_i0_iinf(self)

source code 

Set the relaxation curve fitting parameters {I0, Iinf} for all spins to the same value.

The functions tested are both generic_fns.value.set() and prompt.value.set().