r25887 - /branches/frame_order_cleanup/test_suite/system_tests/frame_order.py -- September 17, 2014 - 17:11

Author: bugman
Date: Wed Sep 17 17:11:57 2014
New Revision: 25887

URL: http://svn.gna.org/viewcvs/relax?rev=25887&view=rev
Log:
Renamed all the Frame_order.test_num_int_pts* system tests to 
Frame_order.test_sobol_setup*.

These system tests where for checking the operation of the old 
frame_order.num_int_pts user
function.  But this is now the frame_order.sobol_setup user function.

Modified:
    branches/frame_order_cleanup/test_suite/system_tests/frame_order.py

Modified: branches/frame_order_cleanup/test_suite/system_tests/frame_order.py
URL: 
http://svn.gna.org/viewcvs/relax/branches/frame_order_cleanup/test_suite/system_tests/frame_order.py?rev=25887&r1=25886&r2=25887&view=diff
==============================================================================
--- branches/frame_order_cleanup/test_suite/system_tests/frame_order.py 
(original)
+++ branches/frame_order_cleanup/test_suite/system_tests/frame_order.py Wed 
Sep 17 17:11:57 2014
@@ -1432,54 +1432,6 @@
             self.assertAlmostEqual(ds.chi2[i], chi2_ref[i])
 
 
-    def test_num_int_pts(self):
-        """Check the basic operation of the frame_order.num_int_pts user 
function."""
-
-        # Create a data pipe.
-        self.interpreter.pipe.create('test', 'frame order')
-
-        # Set a number of points.
-        self.interpreter.frame_order.num_int_pts(200)
-
-
-    def test_num_int_pts2(self):
-        """Check the operation of the frame_order.num_int_pts user function 
with just the model specified."""
-
-        # Create a data pipe.
-        self.interpreter.pipe.create('test', 'frame order')
-
-        # Set the model.
-        self.interpreter.frame_order.select_model('iso cone')
-
-        # Set a number of points.
-        self.interpreter.frame_order.num_int_pts(200)
-
-
-    def test_num_int_pts3(self):
-        """Check the operation of the frame_order.num_int_pts user function 
with the model and parameters set up."""
-
-        # Create a data pipe.
-        self.interpreter.pipe.create('test', 'frame order')
-
-        # Set the model.
-        self.interpreter.frame_order.select_model('iso cone')
-
-        # Set up the system.
-        self.interpreter.value.set(param='ave_pos_x', val=0.0)
-        self.interpreter.value.set(param='ave_pos_y', val=0.0)
-        self.interpreter.value.set(param='ave_pos_z', val=0.0)
-        self.interpreter.value.set(param='ave_pos_alpha', val=0.0)
-        self.interpreter.value.set(param='ave_pos_beta', val=0.0)
-        self.interpreter.value.set(param='ave_pos_gamma', val=0.0)
-        self.interpreter.value.set(param='axis_theta', val=0.5)
-        self.interpreter.value.set(param='axis_phi', val=0.1)
-        self.interpreter.value.set(param='cone_theta', val=0.1)
-        self.interpreter.value.set(param='cone_sigma_max', val=0.1)
-
-        # Set a number of points.
-        self.interpreter.frame_order.num_int_pts(200)
-
-
     def fixme_test_opendx_map(self):
         """Test the mapping of the Euler angle parameters for OpenDx 
viewing."""
 
@@ -1839,3 +1791,51 @@
 
         # Check the chi2 value.
         self.assertAlmostEqual(cdp.chi2, 0.011378666767745968)
+
+
+    def test_sobol_setup(self):
+        """Check the basic operation of the frame_order.sobol_setup user 
function."""
+
+        # Create a data pipe.
+        self.interpreter.pipe.create('test', 'frame order')
+
+        # Set a number of points.
+        self.interpreter.frame_order.sobol_setup(200)
+
+
+    def test_sobol_setup2(self):
+        """Check the operation of the frame_order.sobol_setup user function 
with just the model specified."""
+
+        # Create a data pipe.
+        self.interpreter.pipe.create('test', 'frame order')
+
+        # Set the model.
+        self.interpreter.frame_order.select_model('iso cone')
+
+        # Set a number of points.
+        self.interpreter.frame_order.sobol_setup(200)
+
+
+    def test_sobol_setup3(self):
+        """Check the operation of the frame_order.sobol_setup user function 
with the model and parameters set up."""
+
+        # Create a data pipe.
+        self.interpreter.pipe.create('test', 'frame order')
+
+        # Set the model.
+        self.interpreter.frame_order.select_model('iso cone')
+
+        # Set up the system.
+        self.interpreter.value.set(param='ave_pos_x', val=0.0)
+        self.interpreter.value.set(param='ave_pos_y', val=0.0)
+        self.interpreter.value.set(param='ave_pos_z', val=0.0)
+        self.interpreter.value.set(param='ave_pos_alpha', val=0.0)
+        self.interpreter.value.set(param='ave_pos_beta', val=0.0)
+        self.interpreter.value.set(param='ave_pos_gamma', val=0.0)
+        self.interpreter.value.set(param='axis_theta', val=0.5)
+        self.interpreter.value.set(param='axis_phi', val=0.1)
+        self.interpreter.value.set(param='cone_theta', val=0.1)
+        self.interpreter.value.set(param='cone_sigma_max', val=0.1)
+
+        # Set a number of points.
+        self.interpreter.frame_order.sobol_setup(200)