This is strange. In the relax_disp branch I started the GUI with:
$ relax -g
Then started a new dispersion analysis, opened the prompt window and typed:
relax> cdp.clustering = {
'free spins': [':5@N', ':9@N', ':11@N', ':12@N', ':13@N', ':14@N',
':25@N', ':31@N', ':33@N', ':39@N', ':42@N', ':80@N', ':87@N',
':89@N', ':90@N', ':111@N', ':121@N'],
'model_cluster': [':2@N', ':3@N', ':4@N', ':6@N', ':7@N', ':8@N',
':10@N', ':15@N', ':16@N', ':17@N', ':18@N', ':19@N', ':20@N',
':21@N', ':22@N', ':23@N', ':26@N', ':27@N', ':28@N', ':29@N',
':30@N', ':32@N', ':34@N', ':35@N', ':36@N', ':37@N', ':38@N',
':40@N', ':41@N', ':43@N', ':44@N', ':45@N', ':46@N', ':48@N',
':49@N', ':50@N', ':51@N', ':52@N', ':54@N', ':55@N', ':56@N',
':57@N', ':58@N', ':59@N', ':60@N', ':61@N', ':62@N', ':63@N',
':64@N', ':65@N', ':66@N', ':67@N', ':68@N', ':72@N', ':73@N',
':74@N', ':75@N', ':76@N', ':77@N', ':78@N', ':81@N', ':82@N',
':83@N', ':84@N', ':85@N', ':91@N', ':92@N', ':93@N', ':94@N',
':95@N', ':96@N', ':97@N', ':98@N', ':99@N', ':100@N', ':101@N',
':104@N', ':105@N', ':106@N', ':107@N', ':109@N', ':110@N', ':112@N',
':113@N', ':114@N', ':115@N', ':116@N', ':118@N', ':120@N', ':122@N',
':123@N', ':124@N', ':125@N', ':127@N', ':129@N']
}
Then when I click on the 'Cluster' button in the GUI, I can select
both the 'free spins' and 'model_cluster'. Maybe I was a bit fast
with the email. Could you update your code again, check that you have
r21219, and then see if the problem is still there?
Cheers,
Edward
On 23 October 2013 17:24, Troels Emtekær Linnet <tlinnet@xxxxxxxxxxxxx> wrote:
Hi Edward.
I still see the same behavior.
Best
Troels
2013/10/23 Edward d'Auvergne <edward@xxxxxxxxxxxxx>
Hi Troels,
This does look like it is an issue. I think I have located the
problem to the _cluster_ids() method in
specific_analyses/relax_disp/api.py. At least I fixed a bug in that
method. Could you check again to see if it is fixed?
Cheers,
Edward
On 22 October 2013 19:34, Troels Emtekær Linnet <tlinnet@xxxxxxxxxxxxx>
wrote:
Hi Edward.
Before I do a clustering analysis, I often prepare the data in scripts,
save
the state, and then
inspect the setup in the GUI.
I open the relax saved state.
Open the Data Pipe Editor (Ctrl+d)
Right click the pipe, and click "Associate with new auto-analysis".
If I open the prompt (Ctrl+p), and write
cdp.clustering
I get
{
'free spins': [':5@N', ':9@N', ':11@N', ':12@N', ':13@N', ':14@N',
':25@N',
':31@N', ':33@N', ':39@N', ':42@N', ':80@N', ':87@N', ':89@N', ':90@N',
':111@N', ':121@N'],
'model_cluster': [':2@N', ':3@N', ':4@N', ':6@N', ':7@N', ':8@N',
':10@N',
':15@N', ':16@N', ':17@N', ':18@N', ':19@N', ':20@N', ':21@N', ':22@N',
':23@N', ':26@N', ':27@N', ':28@N', ':29@N', ':30@N', ':32@N', ':34@N',
':35@N', ':36@N', ':37@N', ':38@N', ':40@N', ':41@N', ':43@N', ':44@N',
':45@N', ':46@N', ':48@N', ':49@N', ':50@N', ':51@N', ':52@N', ':54@N',
':55@N', ':56@N', ':57@N', ':58@N', ':59@N', ':60@N', ':61@N', ':62@N',
':63@N', ':64@N', ':65@N', ':66@N', ':67@N', ':68@N', ':72@N', ':73@N',
':74@N', ':75@N', ':76@N', ':77@N', ':78@N', ':81@N', ':82@N', ':83@N',
':84@N', ':85@N', ':91@N', ':92@N', ':93@N', ':94@N', ':95@N', ':96@N',
':97@N', ':98@N', ':99@N', ':100@N', ':101@N', ':104@N', ':105@N',
':106@N',
':107@N', ':109@N', ':110@N', ':112@N', ':113@N', ':114@N', ':115@N',
':116@N', ':118@N', ':120@N', ':122@N', ':123@N', ':124@N', ':125@N',
':127@N', ':129@N']
}
But if I click the "Cluster" button, The cluster ID "model_cluster'", is
not
available from the drop-down list.
Should this be fixed?
Best
Troels
_______________________________________________
relax (http://www.nmr-relax.com)
This is the relax-devel mailing list
relax-devel@xxxxxxx
To unsubscribe from this list, get a password
reminder, or change your subscription options,
visit the list information page at
https://mail.gna.org/listinfo/relax-devel
Re: Discrepancy for the cluster ID's saved in state an available in GUI.