Re: value.display() -- August 13, 2009 - 08:21

Dear Edward,
Thank you for the fast response!

I have read the parent thread and performed the required update. It
seems to install normally (message at the terminal: "Checked out
revision 9291."), but still the problem persists. I guess I will wait
for version 1.3.4 and install it to see if it will fix the issue.
Please let me know if you have other suggestions, or require more information.

Thank you once again!

Vitaly

On Wed, Aug 12, 2009 at 04:55, Edward d'Auvergne<edward@xxxxxxxxxxxxx> wrote:
> Dear Vic,
>
> Welcome to the relax mailing lists :)  What you have encountered here
> is an old bug relating to ancient relax-1.2 code.  This has now been
> fixed in the repository which, if you have subversion installed, can
> be retrieved by following the instructions in
> https://mail.gna.org/public/relax-users/2009-02/msg00020.html.  I will
> soon be releasing relax-1.3.4 if you would like to wait a week or so,
> otherwise you can use the repository code.  Note that this bug was
> already encountered by Raj Jose in the parent message to the above
> link (at https://mail.gna.org/public/relax-users/2009-02/msg00018.html).
>  I hope this helps.
>
> Regards,
>
> Edward
>
>
>
> On Sun, Aug 9, 2009 at 6:47 AM, Vic Vostr<vvostri@xxxxxxxxx> wrote:
> > Hi,
> >
> > I am trying to set-up the output of model-free parameters as described
> > earlier (https://mail.gna.org/public/relax-users/2009-02/msg00012.html),
> > and I seem to run into the same issue as Prem
> > (http://www.mail-archive.com/relax-users@xxxxxxx/msg00606.html). I
> > have performed the update
> > (http://www.mail-archive.com/relax-users@xxxxxxx/msg00608.html), but
> > it did not fix it.
> >
> > Script 1:
> >  pipe.create('test', 'mf')
> >  results.read(file='tm1/results')
> >  value.display('S2')
> >
> > Relax output 1:
> >  pipe.create(pipe_name='my data', pipe_type='mf')
> >  Opening the file 'tm1/results.bz2' for reading.
> >  value.display(run='S2', param=None)
> >  RelaxError: The parameter argument None must be a string.
> >
> > Script 2:
> >  pipe.create('my data', 'mf')
> >  results.read(file='tm1/results')
> >  value.display(run='tm1', param='S2')
> >
> > Relax output 2:
> >  pipe.create(pipe_name='my data', pipe_type='mf')
> >  Opening the file 'tm1/results.bz2' for reading.
> >  value.display(run='tm1', param='S2')
> >  Traceback (most recent call last):
> >   File "relax", line 422, in <module>
> >     Relax()
> >   File "relax", line 131, in __init__
> >     self.interpreter.run(self.script_file)
> >   File "/home/vvostri/Desktop/relax-1.3.3/prompt/interpreter.py",
> > line 270, in run
> >     return run_script(intro=self.__intro_string, local=self.local,
> > script_file=script_file, quit=self.__quit_flag,
> > show_script=self.__show_script,
> > raise_relax_error=self.__raise_relax_error)
> >   File "/home/vvostri/Desktop/relax-1.3.3/prompt/interpreter.py",
> > line 531, in run_script
> >     return console.interact(intro, local, script_file, quit,
> > show_script=show_script, raise_relax_error=raise_relax_error)
> >   File "/home/vvostri/Desktop/relax-1.3.3/prompt/interpreter.py",
> > line 427, in interact_script
> >     execfile(script_file, local)
> >   File "model-free.py", line 94, in <module>
> >     value.display(run='tm1', param='S2')
> >   File "/home/vvostri/Desktop/relax-1.3.3/prompt/value.py", line
> > 152, in display
> >     self.__relax__.generic.value.display(run=run, param=param)
> >  TypeError: display() got an unexpected keyword argument 'run'
> >
> > Thank you in advance!
> >
> > Vitaly
> >
> > _______________________________________________
> > relax (http://nmr-relax.com)
> >
> > This is the relax-users mailing list
> > relax-users@xxxxxxx
> >
> > To unsubscribe from this list, get a password
> > reminder, or change your subscription options,
> > visit the list information page at
> > https://mail.gna.org/listinfo/relax-users