Author: semor
Date: Fri Feb 8 19:34:17 2008
New Revision: 4940
URL: http://svn.gna.org/viewcvs/relax?rev=4940&view=rev
Log:
Merged revisions 4939 via svnmerge from
svn+ssh://semor@xxxxxxxxxxx/svn/relax/1.3
........
r4939 | semor | 2008-02-08 13:24:56 -0500 (Fri, 08 Feb 2008) | 9 lines
Corrected a few errors in the manual concerning the
diffusion_tensor.init() function.
Some wrong 'param_types' were given in the examples.
This was pointed in a post by Sebastien morin at:
https://mail.gna.org/public/relax-devel/2008-02/msg00004.html (Message-id:
<47AC8138.9050703@xxxxxxxxx>)
........
Modified:
1.2/ (props changed)
1.2/prompt/diffusion_tensor.py
Propchange: 1.2/
------------------------------------------------------------------------------
--- svnmerge-integrated (original)
+++ svnmerge-integrated Fri Feb 8 19:34:17 2008
@@ -1,1 +1,1 @@
-/1.3:1-2505,2941,2947,2950,2974,2976,2979,2984,2988,3076,3083-3084,3087,3117,3299,3309,3312,3314,3318,3345,3372,4145,4473,4476
+/1.3:1-2505,2941,2947,2950,2974,2976,2979,2984,2988,3076,3083-3084,3087,3117,3299,3309,3312,3314,3318,3345,3372,4145,4473,4476,4939
Modified: 1.2/prompt/diffusion_tensor.py
URL:
http://svn.gna.org/viewcvs/relax/1.2/prompt/diffusion_tensor.py?rev=4940&r1=4939&r2=4940&view=diff
==============================================================================
--- 1.2/prompt/diffusion_tensor.py (original)
+++ 1.2/prompt/diffusion_tensor.py Fri Feb 8 19:34:17 2008
@@ -367,24 +367,24 @@
To select axially symmetric diffusion with a tm value of 8.5 ns,
Dratio of 1.1, theta value
of 20 degrees, and phi value of 20 degrees, and assign it to the
run 'm8', type:
- relax> diffusion_tensor('m8', (8.5e-9, 1.1, 20.0, 20.0),
param_types=1)
+ relax> diffusion_tensor('m8', (8.5e-9, 1.1, 20.0, 20.0),
param_types=2)
To select a spheroid diffusion tensor with a Dpar value of
1.698e7, Dper value of 1.417e7,
theta value of 67.174 degrees, and phi value of -83.718 degrees,
and assign it to the run
'spheroid', type one of:
- relax> diffusion_tensor('spheroid', (1.698e7, 1.417e7, 67.174,
-83.718), param_types=1)
+ relax> diffusion_tensor('spheroid', (1.698e7, 1.417e7, 67.174,
-83.718), param_types=3)
relax> diffusion_tensor(run='spheroid', params=(1.698e7, 1.417e7,
67.174, -83.718),
- param_types=1)
- relax> diffusion_tensor('spheroid', (1.698e-1, 1.417e-1, 67.174,
-83.718), param_types=1,
+ param_types=3)
+ relax> diffusion_tensor('spheroid', (1.698e-1, 1.417e-1, 67.174,
-83.718), param_types=3,
d_scale=1e8)
relax> diffusion_tensor(run='spheroid', params=(1.698e-1,
1.417e-1, 67.174, -83.718),
- param_types=1, d_scale=1e8)
- relax> diffusion_tensor('spheroid', (1.698e-1, 1.417e-1, 1.1724,
-1.4612), param_types=1,
+ param_types=3, d_scale=1e8)
+ relax> diffusion_tensor('spheroid', (1.698e-1, 1.417e-1, 1.1724,
-1.4612), param_types=3,
d_scale=1e8, angle_units='rad')
relax> diffusion_tensor(run='spheroid', params=(1.698e-1,
1.417e-1, 1.1724, -1.4612),
- param_types=1, d_scale=1e8,
angle_units='rad', fixed=1)
+ param_types=3, d_scale=1e8,
angle_units='rad', fixed=1)
To select ellipsoidal diffusion, type:
_______________________________________________
relax (http://nmr-relax.com)
This is the relax-commits mailing list
relax-commits@xxxxxxx
To unsubscribe from this list, get a password
reminder, or change your subscription options,
visit the list information page at
https://mail.gna.org/listinfo/relax-commits